The bucket elevators making verticak transfer are grouped in 2 according to working principles.
Used where the metal materials should’nt meet with material like food business (sugar, salt, etc.)
When the transfer capacity or the density of the material is high.
Besides buckets and the body parts are designed and manufactured due to DIN Standarts, we sure produce tailormade bucket elevators due to demands.
This is one of our main products. Through the years of experience we reached the highest level of quality.
The screw conveyors we supply shall be diversified by the body form and flight forms.
Used in short distance, where dust prevention is important.
Used in long distance.
As same in U-Type but especially prefered where fluidity is low.
Genel olarak çok küçük çaplı helezonlarda teknenin silindirlerde büküm zorluğu olan ve büyük teknelerde de ölçü beraberliğinin temini için tercih edilir.
It is same as K Type but the lower corners are cut 45. Generally used with screw with high diameters.
The application of KP Type with multi screws.
There is no welding connection. All the screw is produced from one plate of steel.
Produced from the shovel formed steel by giving them a spiral form. If mixage is needed during transfer this screws shall be prefered.
Same as moon flight screws but the form of the blade is different.
As may be understood from its name, the material is forced to enter the system with big diameter and leave the system in small diameter. Eespecially used in extraction.
Bu tip helezonlar yukarda belirtilen hallerin tam tersinde, yani malzemenin sıkıştırılması gereken hallerde kullanılır. Malzeme helezona büyük hatvede girip küçük hatvede dışarı çıkmaya zorlanır. Yoğun olarak yağ çıkarma ve ekstrüksiyon işlerinde tercih edilir.
Konik teknelerde kullanılan bu tür yapraklar Hatveleri Azalan Yapraklarda olduğu gibi malzemenin taşımanın sonuna doğru sıkıştırılması gerektiğinde kullanılır.
These flights work in a plastic tube and is able to stretch with it.
If the material is coming in irregular forms it is prefered.
Used for caustic materials like sand washing.
This design is made by H.TORAMAN, to prevent the pollution during the disposal of the materials like as hor dust from the system.
There are 2 main methods; flushing of the pulverized water on the ash/ust and the other is to flush special chemicals through the nosuls to block dust.
With the countless belt conceyors we produced sop far, we met the needs and expectations of our clients in material transfering systems.
Besides all our conveyors are designed and manufactured due to DIN Standats, we sure produce tailormade conveyors due to demands.
Belt conveyors mainly can be grouped in four;
